CE
Cat II
Certification
EN812:2012
Very low temperature
-30°C
Adjustability
Buckle
Shell Material
HDPE
SWEATBAND MATERIAL
Brushed nylon, 1.5mm spacer fabric 100% Polyester, Cocona 37.5® Technology
Liner material
Blown Polypropylene Foam
Solid cap fabric
50% Polyester, 42% Polyester 37.5® Technology, 8% Spandex
Mesh cap fabric
100% Polyester
Adjustment elastic band material
50% Polyester, 50% Segmented Polyurethane (Reach 151 SVHC)
Adjustment buckle material
POM
Peak Length
70mm
SHELF-LIFE
5 years as long as undamaged
CLEANING
"Clean and disinfect the bump cap shell with mild detergent and warm water. Do not use solvents or harsh chemicals as those will affect the shell. The bump cap fabric skin can be home laundered at 40oC and air dried, also refer to the wash label on the bump cap fabric cover."
STORAGE
"Pre-use they should be stored in the manufacturers packaging. Store the bump cap in a dry place at ambient temperature, away from direct sun, frost or chemical substances. Transport the bump cap in a clean and sufficiently stable container avoiding any impacts or objects falling onto it."
DISPOSAL
"You can dispose of your bump cap as residual waste, in accordance with general disposal information. The bump cap shell is marked with its recycling category."
Helmet Marking 1
CE
Helmet Marking 2
Notified Body number: 2797
Helmet Marking 3
EN 812:2012
Helmet Marking 4
Warning: Not EN 397 / ANSI Z89 approved. Do not use in a hard hat area
Helmet Marking 5
Size range: 54-64 cm
Helmet Marking 6
Temperature: -30°C / 50°C
Helmet Marking 7
Manufacturer: ENHA
Helmet Marking 8
Product name: SYNTIS
Helmet Marking 9
Date of manufacture: month/year
Helmet Marking 10
A Material: HDPE recycling symbol
Helmet Marking 11
A Designs registered. Patent Pending