BMD20 Ear Defender

BMD20

Ear Defender

BMD20 Ear Defender mobile image

Product Features

  • Durable & robust construction
  • Lightweight
  • Soft ear cushions
  • Easy adjustment
  • Conforms with EN352-1:2002
  • SNR 26dB



Applications

Aircraft and Airfield Operations
Highway Repairs and Maintenance
Working in Extreme Temperatures
Bottling and Canning
Craft and Hobbies
Food Preparation and Handling
Drilling and Boring
Fossil Fuel Extraction and Refining
Woodwork and Fabrication
General Maintenance
Metal Forging and Processing

Features

Enhanced Comfort
Fits Any Ear
Lightweight

Further Information

The BMD20 is a lightweight ear defender with the ability to easily switch between a headband or neckband wearing position. BMD20’s soft ear cushions and easy adjustment provides a comfortable fit for most head sizes.

Product Specifics

SKUBMD00020BZ
Primary Color
Black
Headband Connector MaterialABS
Cup MaterialABS
Cup CushionPVC, Foam
Headband / Arms MaterialHeadband
Reusable

SNR

Overall26dB
High29dB
Medium23dB
Low17dB

Certifications

EN 352-1:2002

Packaging

Items per Case40
Case height40cm
Case width41cm
Case length53cm
Case weight9.5kg

Unit Dimensions

Unit Weight150g

Frequencies Protection

Frequency (HZ) 125hz (Hz) 250hz (Hz) 500hz (Hz) 1000hz (Hz) 2000hz (Hz) 4000hz (Hz) 8000hz (Hz)
Mean Attenuation 15.4 16.1 22.6 35.1 31.9 36.1 28.3
Standard Deviation 2.8 2.6 2.4 4.1 3.2 3.2 3.3
Assumed Protection 12.6 13.5 20.2 31 28.7 32.9 25
Recommendations for Use
Refer to manufacturer instructions before wear. Cup type ear defenders and especially the ear cushions can wear by even normal use and should be frequently inspected for signs of and cracks. Replace the ear cushions if necessary but at least every 6 months. The old sealing pads can be pulled off and the replacements carefully attached to the ear cups in the correct position. The cup foam inlays also should be replaced on a regular basis. (recommended every 6 months). The headband should not be bent or adjusted if not necessary in order to provide the tension required for the optimal performance of the hearing protector.
Cleaning
This product can be adversely affected by certain chemical substances Additional information should be obtained by the manufacturer Please do not clean with any chemicals The ear defenders can be cleaned using a cloth which has been moistened using warm soap water Allow to dry before reuse Do not use any abrasive brushes or other materials which could damage the insulating lining or seals Do not immerse the ear defenders in water Only use cleaning agents which do not adversley affect the user
Storage
Before use, always keep the ear defender in its original packaging and in a dry, clean, uncontaminated environment. To avoid potential damage, ensure the earpiece pads are not pressed together during storage.
EC Compliance
Economic Operator [EU]: Globus EMEA Ltd., 51 Dawson Street, Dublin, D02 AN25, Ireland. Product conforms to the requirements of: UK regulation 2016/425 on PPE, brought into UK Law and amended & Regulation (EU) 2016/425 of the European Parliament and of the Council as Personal Protective Equipment (PPE). Type-Examination, (Module B), Certificates issued by: UK - INSPEC International Limited, 56 Leslie Hough Way, Salford, Greater Manchester, M6 6AJ, U.K. [UK Approved Body No. 0194]. EU - INSPEC International B.V., Beechavenue 54-62, 1119 PW, Schiphol-Rijk, The Netherlands. [EU Notified Body No. 2849]. PPE is subject to the conformity assessment procedure, conformity to type based on Quality Assurance of the production process, (Module D), under the surveillance of the Notified Body(-ies): UK - INSPEC International Limited, 56 Leslie Hough Way, Salford, Greater Manchester, M6 6AJ, U.K. [UK Approved Body No. 0194]. EU - INSPEC International B.V., Beechavenue 54-62, 1119 PW, Schiphol-Rijk, The Netherlands. [EU Notified Body No. 2849].
Compare 3 products selected