Sota HH5
Helmet Mounted Earmuff
Product Features
- SNR 32db
- Low profile cup design
- Large ear cushions allow freedom to fit majority of ears
- Slot easily into position with a lock mechanism for work or rest
- Low pressure but high performance ear muff
- Quality gloss finish for easy maintenance
- Stylish orange and black design
- Compatible with Skytec Radius and Rockman Helmets
- Approved to EN 352-3:2020
Certifications
CAT III
Applications
Aircraft and Airfield Operations
Highway Repairs and Maintenance
Working in Extreme Temperatures
Bottling and Canning
Craft and Hobbies
Food Preparation and Handling
Drilling and Boring
Fossil Fuel Extraction and Refining
Woodwork and Fabrication
General Maintenance
Metal Forging and Processing
Further Information
High performing, comfortable helmet mounted earmuff. The HH5 features soft ear cushions that is compatible with Radius and Rockman.
Product Specifics
| SKU | HME/ALP/SOTAHH5 |
|---|---|
| Primary Colour |
Orange
|
| Secondary Colour |
Black
|
| Wire Material | Chrome-plated Steel |
| Ring Material | ABS |
| Clip Material | ABS |
| Cup Material | ABS, Foam |
| Cup Cushion | Foam, PVC |
| Headband / Arms | Arms |
SNR
| Overall | 32dB |
|---|---|
| High | 34dB |
| Medium | 30dB |
| Low | 23dB |
Certifications
| EN 352-3:2020 | ✓ |
|---|
Packaging
| Items per Case | 20 |
|---|---|
| Case height | 31cm |
| Case width | 42cm |
| Case length | 58cm |
| Case weight | 8.25kg |
Unit Dimensions
| Unit Weight | 4.12g |
|---|
Certifications
| CE | ✓ |
|---|---|
| Cat Level | III |
Frequencies Protection
| Frequency (HZ) | 125hz (Hz) | 250hz (Hz) | 500hz (Hz) | 1000hz (Hz) | 2000hz (Hz) | 4000hz (Hz) | 8000hz (Hz) |
|---|---|---|---|---|---|---|---|
| Mean Attenuation | 19.1 | 22.6 | 30.4 | 37 | 34.2 | 38.6 | 36.8 |
| Standard Deviation | 2.7 | 3.2 | 3.5 | 2.7 | 1.9 | 3.6 | 3.4 |
| Assumed Protection | 16.4 | 19.4 | 26.9 | 34.3 | 32.3 | 35 | 33.4 |
Recommendations for Use
Refer to manufacturer instructions before wear. Cup type ear defenders and especially the ear cushions can wear by even normal use and should be frequently inspected for signs of and cracks. Replace the ear cushions if necessary but at least every 6 months. The old sealing pads can be pulled off and the replacements carefully attached to the ear cups in the correct position. The cup foam inlays also should be replaced on a regular basis. (recommended every 6 months). The headband should not be bent or adjusted if not necessary in order to provide the tension required for the optimal performance of the hearing protector.
Cleaning
This product can be adversely affected by certain chemical substances
Additional information should be obtained by the manufacturer
Please do not clean with any chemicals
The ear defenders can be cleaned using a cloth which has been moistened using warm soap water
Allow to dry before reuse
Do not use any abrasive brushes or other materials which could damage the insulating lining or seals
Do not immerse the ear defenders in water
Only use cleaning agents which do not adversley affect the user
Storage
Before use, always keep the ear defender in its original packaging and in a dry, clean, uncontaminated environment. To avoid potential damage, ensure the earpiece pads are not pressed together during storage.
EC Compliance
Economic Operator [EU]: Globus EMEA Ltd., 51 Dawson Street, Dublin, D02 AN25, Ireland.
Product conforms to the requirement of: UK Regulation 2016/425 on PPE, brought into UK Law and amended & Regulation (EU) 2016/425 of the European Parliament and of the Council as Personal Protective Equipment (PPE).
Type-Examination, (Module B), Certificates issued by:
UK - CCQS UK Ltd., Level 2, 5 Harbour Exchange Square, London, E14 9GE, UK [A.B. No. 1105].
EU - CCQS Certification Services Limited, Block 1 Blanchardstown Corporate Park, Ballycoolin Road, Blanchardstown, Dublin D155 AKK1, Ireland [N.B. No. 2834].
PPE is subject to the conformity assessment procedure, conformity to type based on Quality Assurance of the production process, (Module D), under the surveillance of the Approved/Notified Body(-ies):
UK - SGS UK Ltd., Rossmore Business Park, Ellesmere Port, Cheshire, CH65 3EN, UK. [A.B. No. 0120].
EU - SGS Fimko Oy, Takomtie 8, FI-00380, Helsinki, Finland. [N.B. No. 0598].
