ASF-2 Alpha Fold+ FFP2
ASF-2 Alpha Fold+ FFP2

ASF-2

FFP2 disposable fold-flat respirator

ASF-2 Alpha Fold+ FFP2 mobile image
ASF-2 Alpha Fold+ FFP2 mobile image

Product Features

  • Lightweight, fold-flat respirator
  • Flexible nose bridge
  • Inner seal around the nose area
  • for an effective fit
  • Electrostatic filter media
  • Conforms to EN 149:2001+A1:2009 FFP2 NR
  • Available in two size options, (regular - AFS and small - ASFS).
  • Ideal to fit a wide range of face shapes
  • Adjustable loop-through straps
  • Latex Free

Certifications

CAT III

Options




Applications

Masonry and Brickwork
Chemical Handling and Containment
Disease and Infection Control
Woodwork and Fabrication
Plastering

Features

Made in the UK

Further Information

The AlphaFold+ is a vertical fold flat disposable respirator designed with an inner face seal, adjustable straps and two size options to offer an excellent fit for all face shapes.

Available Options

Product Code Size Colour Weight
ASRASF200AD S
White
1.38g
ASRASF200AF M
White
1.38g

Product Specifics

Master SKUASRASF200
SeriesAlphafold+
Filter Media MaterialNon-Woven Textile
Inner Cover MaterialPolypropylene
Headstrap MaterialLatex-Free Elastane, Polyester, Textile Elastic
Outer Cover MaterialPolypropylene
Nosefoam MaterialPolyethylene Foam

Certifications

CE
Cat LevelIII
UKCA
EN 149:2001 + A1:2009 FFP2 NR

EN 149:2001

Class FFP2
Disposable

Options

Selected Option Specifics (ASRASF200AD) (ASRASF200AF)

SKUASRASF200AD
SizeS
Main Colour
White
Shelf Life5yr

Selected Option Specifics (ASRASF200AD) (ASRASF200AF)

SKUASRASF200AF
SizeM
Main Colour
White
Shelf Life5yr

Storage Conditions

Minimum Temperature-5°C
Maximum Temperature35°C
Humidity<70%

Unit Dimensions

Unit Weight1.38g

Unit Dimensions

Unit Weight1.38g

Packaging

Items per Pack20
Items per Case240
Case height44cm
Case width24cm
Case length54cm
Units per Pallet5760

Packaging

Items per Pack20
Items per Case240
Case height44cm
Case width24cm
Case length54cm
Units per Pallet5760

Product Selector Guidance Chart

Option Assigned Protection (APF) Oil/Water Based Particulates Non-Toxic Dusts Fine Toxic Dusts/Mists/Fumes Very Fine Toxic Dusts/Mists/Fumes Metal Fume
ASRASF200AD 10 Recommended Recommended Recommended
ASRASF200AF 10 Recommended Recommended Recommended

Parts Dimensions

Part Width Length Height
Respirator 120 mm 155 mm 10 mm
Part Width Length Height
Respirator 125 mm 160 mm 10 mm
Recommendations for Use
USER INSTRUCTIONS: Use only in accordance with these instructions, as incorrect use could result in danger to life or health. Fit according to instructions BEFORE entering the contaminated area. Discard safely after use or replace with a new respirator if: • Excessive clogging of the respirator causes breathing difficulty or discomfort • If the respirator becomes damaged • The respirator has been worn for 8 hours. Do not use in oxygen deficient, (less than 19%), explosive atmospheres or confined spaces where gases or aerosols may accumulate and the concentration of contaminant is immediately dangerous to life or health, (over the IDLH value). Leave the contaminated area if: • The respirator is damaged • You become dizzy or have difficulty breathing • You become irritated or other distress occurs • You become uncertain of the nature and/or concentration of contaminant. WARNING: • As facial hair reduces the protection offered it is recommended that these respirators are used by clean shaven personnel only • Do not use for protection against gases • Single shift use only • Do not remove whilst in contaminated area.
Recommendations for Use
USER INSTRUCTIONS: Use only in accordance with these instructions, as incorrect use could result in danger to life or health. Fit according to instructions BEFORE entering the contaminated area. Discard safely after use or replace with a new respirator if: • Excessive clogging of the respirator causes breathing difficulty or discomfort • If the respirator becomes damaged • The respirator has been worn for 8 hours. Do not use in oxygen deficient, (less than 19%), explosive atmospheres or confined spaces where gases or aerosols may accumulate and the concentration of contaminant is immediately dangerous to life or health, (over the IDLH value). Leave the contaminated area if: • The respirator is damaged • You become dizzy or have difficulty breathing • You become irritated or other distress occurs • You become uncertain of the nature and/or concentration of contaminant. WARNING: • As facial hair reduces the protection offered it is recommended that these respirators are used by clean shaven personnel only • Do not use for protection against gases • Single shift use only • Do not remove whilst in contaminated area.
EC Compliance
Economic Operator [EU]: Globus EMEA Ltd., 51 Dawson Street, Dublin, D02 AN25, Ireland. Product conforms to the requirement of: UK Regulation 2016/425 on PPE, brought into UK Law and amended & Regulation (EU) 2016/425 of the European Parliament and of the Council as Personal Protective Equipment (PPE). Type-Examination, (Module B), Certificates issued by: UK - CCQS UK Ltd., Level 2, 5 Harbour Exchange Square, London, E14 9GE, UK [A.B. No. 1105]. EU - CCQS Certification Services Limited, Block 1 Blanchardstown Corporate Park, Ballycoolin Road, Blanchardstown, Dublin D155 AKK1, Ireland [N.B. No. 2834]. PPE is subject to the conformity assessment procedure, conformity to type based on Quality Assurance of the production process, (Module D), under the surveillance of the Approved/Notified Body(-ies): UK - SGS UK Ltd., Rossmore Business Park, Ellesmere Port, Cheshire, CH65 3EN, UK. [A.B. No. 0120]. EU - SGS Fimko Oy, Takomtie 8, FI-00380, Helsinki, Finland. [N.B. No. 0598].

You may also like

Compare 3 products selected