3530V Cup Mask (3500 Series)
3530V Cup Mask (3500 Series)
3530V Cup Mask (3500 Series)


FFP3, valved respirator. disposable with pre-formed cup shape

3530V Cup Mask (3500 Series) mobile image
3530V Cup Mask (3500 Series) mobile image
3530V Cup Mask (3500 Series) mobile image

Product Features

  • Lightweight, cup shaped respirator
  • Four point headstrap adjustment
  • Preformed nosebridge removes the need for regular adjustment
  • Electrostatic filter media
  • Soft touch elastic
  • PVC Foam Inner Face Seal
  • Conforms to EN 149:2001+A1:2009 FFP3 NR
  • Low Profile Exhalation Valve helps reduce heat and moisture build up





Battery Manufacturing
Craft and Hobbies
Metal Fabrication Work
Disease and Infection Control
Handling Hazardous and Toxic Waste
Woodwork and Fabrication


4 Point Headstrap Adjustment
Preformed Nose Bridge
Low Profile Valve
Unique Inner Face Seal
Suitable for Healthcare
Made in the UK

Further Information

The 3500 SERIES disposable respirators offer an outstanding level of protection demonstrated when conducting Face Fit Testing. Having electrostatic filter media allows low breathing resistance and a lightweight outer shell maintains excellent shape.

Available Options

Product Code Colour Weight
White /Orange

Product Specifics

Master SKUASR35301
Filter Media MaterialNon-Woven Textile
Inner Cover MaterialPolypropylene
Headstrap MaterialLatex-Free Elastane, Polyester, Textile Elastic
Outer Cover MaterialPolypropylene
Nosefoam MaterialPolyethylene Foam


Cat LevelIII
EN 149:2001 + A1:2009 FFP3 NR

EN 149:2001

Class FFP3


Selected Option Specifics (ASR35301AZ)

Main Colour
Secondary Colour
Shelf Life5yr

Storage Conditions

Minimum Temperature-5°C
Maximum Temperature35°C

Unit Dimensions

Unit Weight3.45g


Items per Pack5
Items per Case100
Case height32cm
Case width44cm
Case length65cm
Case weight4.58kg
Packs per Carton20
Units per Pallet1600

Product Selector Guidance Chart

Option Assigned Protection (APF) Oil/Water Based Particulates Non-Toxic Dusts Fine Toxic Dusts/Mists/Fumes Very Fine Toxic Dusts/Mists/Fumes Metal Fume
ASR35301AZ 20 Recommended Alternative Alternative Recommended Recommended

Parts Dimensions

Part Width Length Height
Exhalation Valve 34 mm 37 mm 8 mm
Headband Clip 19 mm 37 mm 4 mm
Headband 14 mm 420 mm 0.4 mm
Nosebridge 40 in 45 in 35 in
Respirator 60 mm 150 mm 130 mm
Recommendations for Use
USER INSTRUCTIONS: Use only in accordance with these instructions, as incorrect use could result in danger to life or health. Fit according to instructions BEFORE entering the contaminated area. Discard safely after use or replace with a new respirator if: • Excessive clogging of the respirator causes breathing difficulty or discomfort • If the respirator becomes damaged • The respirator has been worn for 8 hours. Do not use in oxygen deficient, (less than 19%), explosive atmospheres or confined spaces where gases or aerosols may accumulate and the concentration of contaminant is immediately dangerous to life or health, (over the IDLH value). Leave the contaminated area if: • The respirator is damaged • You become dizzy or have difficulty breathing • You become irritated or other distress occurs • You become uncertain of the nature and/or concentration of contaminant. WARNING: • As facial hair reduces the protection offered it is recommended that these respirators are used by clean shaven personnel only • Do not use for protection against gases • Single shift use only • Do not remove whilst in contaminated area.
EC Compliance
Economic Operator [EU]: Globus EMEA Ltd., 51 Dawson Street, Dublin, D02 AN25, Ireland. Product conforms to the requirement of: UK Regulation 2016/425 on PPE, brought into UK Law and amended & Regulation (EU) 2016/425 of the European Parliament and of the Council as Personal Protective Equipment (PPE). Type-Examination, (Module B), Certificates issued by: UK - CCQS UK Ltd., Level 2, 5 Harbour Exchange Square, London, E14 9GE, UK. [A.B. No. 1105]. EU - CCQS Certification Services Ltd., Block 1 Blanchardstown Corporate Park, Ballycoolin Road, Blanchardstown, Dublin D155 AKK1, Ireland. [N.B. No. 2834]. PPE is subject to the conformity assessment procedure, conformity to type based on Quality Assurances of the production process, (Module D), under the surveillance of the Approved/Notified Body(ies): UK - SGS UK Ltd., Rossmore Business Park, Ellesmere Port, Cheshire, CH65 3EN, UK. [A.B. No. 0120]. EU - SGS Fimko Oy, Takomtie 8, FI-00380, Helsinki, Finland. [N.B. No. 0598].

You may also like

Compare 3 products selected