6020 Cup Mask (6000 Series)

6020

FFP2 disposable pre-formed cup shape respirator

6020 Cup Mask (6000 Series) mobile image

Product Features

  • Lightweight, cup shaped respirator
  • Preformed nosebridge removes the need for regular adjustment
  • Electrostatic filter media
  • Soft touch elastic
  • PVC Foam Face Seal
  • Conforms to EN 149:2001+A1:2009 & EN 14683:2019+AC:2019
  • FFP2 NR
  • Valve free
  • Metal free

Certifications

CAT III

Options




Applications

Painting and Finishing
Craft and Hobbies
Chemical Handling and Containment
Gardening
Labouring
Metal Fabrication Work
Handling Hazardous and Toxic Waste
Woodwork and Fabrication

Features

4 Point Headstrap Adjustment
Preformed Nose Bridge
Unique Inner Face Seal
Suitable for Healthcare
Made in the UK

Further Information

The 6000-SERIES is a uniquely designed cup-shaped respirator offering a lightweight solution to protect against hazardous particles. The respirator features a preformed nose bridge and foam internal providing a secure and comfortable fit.

Available Options

Product Code Colour Weight
ASR60200AZ
White /Orange
1.4g

Product Specifics

Master SKUASR60200
Series6000
Filter Media MaterialNon-Woven Textile
Inner Cover MaterialPolypropylene
Headstrap MaterialLatex-Free Elastane, Polyester, Textile Elastic
Outer Cover MaterialPolypropylene
Nosefoam MaterialPolyethylene Foam

Certifications

CE
Cat LevelIII
UKCA
EN 149:2001 + A1:2009 FFP2 NR
EN 14683:2019 Type IIR
EN 136:1998 Class 1

EN 149:2001

Class FFP2
Disposable

Options

Selected Option Specifics (ASR60200AZ)

SKUASR60200AZ
Main Colour
White
Secondary Colour
Orange
Shelf Life5yr

Storage Conditions

Minimum Temperature-5°C
Maximum Temperature35°C
Humidity<70%

Unit Dimensions

Unit Weight1.4g

Packaging

Items per Pack20
Items per Case240
Case height22cm
Case width13cm
Case length14cm
Units per Pallet5760

Product Selector Guidance Chart

Option Assigned Protection (APF) Oil/Water Based Particulates Non-Toxic Dusts Fine Toxic Dusts/Mists/Fumes Very Fine Toxic Dusts/Mists/Fumes Metal Fume
ASR60200AZ 10 Recommended Recommended Recommended

Parts Dimensions

Part Width Length Height
Headband Clip 19 mm 37 mm 4 mm
Headband 12 mm 420 mm 0.4 mm
Nosebridge 45 in 45 in 45 in
Respirator 143 mm 137 mm 47 mm
Recommendations for Use
USER INSTRUCTIONS: Use only in accordance with these instructions, as incorrect use could result in danger to life or health. Fit according to instructions BEFORE entering the contaminated area. Discard safely after use or replace with a new respirator if: • Excessive clogging of the respirator causes breathing difficulty or discomfort • If the respirator becomes damaged • The respirator has been worn for 8 hours. Do not use in oxygen deficient, (less than 19%), explosive atmospheres or confined spaces where gases or aerosols may accumulate and the concentration of contaminant is immediately dangerous to life or health, (over the IDLH value). Leave the contaminated area if: • The respirator is damaged • You become dizzy or have difficulty breathing • You become irritated or other distress occurs • You become uncertain of the nature and/or concentration of contaminant. WARNING: • As facial hair reduces the protection offered it is recommended that these respirators are used by clean shaven personnel only • Do not use for protection against gases • Single shift use only • Do not remove whilst in contaminated area.
EC Compliance
Economic Operator [EU]: Globus EMEA Ltd., 51 Dawson Street, Dublin, D02 AN25, Ireland. Product conforms to the requirement of: UK Regulation 2016/425 on PPE, brought into UK Law and amended & Regulation (EU) 2016/425 of the European Parliament and of the Council as Personal Protective Equipment (PPE). Type-Examination, (Module B), Certificates issued by: UK - CCQS UK Ltd., Level 2, 5 Harbour Exchange Square, London, E14 9GE, UK. [A.B. No. 1105]. EU - CCQS Certification Services Ltd., Block 1 Blanchardstown Corporate Park, Ballycoolin Road, Blanchardstown, Dublin D155 AKK1, Ireland. [N.B. No. 2834]. PPE is subject to the conformity assessment procedure, conformity to type based on Quality Assurances of the production process, (Module D), under the surveillance of the Approved/Notified Body(ies): UK - SGS UK Ltd., Rossmore Business Park, Ellesmere Port, Cheshire, CH65 3EN, UK. [A.B. No. 0120]. EU - SGS Fimko Oy, Takomtie 8, FI-00380, Helsinki, Finland. [N.B. No. 0598].

You may also like

Compare 3 products selected