6030V Cup Mask FFP3 Valved

6030V

P3 Disposable Pre-Formed Cup Shape Respirator

6030V Cup Mask FFP3 Valved mobile image

Product Features

  • Lightweight, cup shaped respirator
  • Four point headstrap adjustment
  • Preformed nosebridge removes the need for regular adjustment
  • Electrostatic filter media
  • Soft touch elastic
  • PVC Foam Full Inner Face Seal
  • Conforms to EN 149:2001+A1:2009
  • FFP3 NR
  • Low profile exhalation valve to reduce heat and moisture build up

Certifications

CAT III

Options


Product Resources



Applications

Battery Manufacturing
Craft and Hobbies
Gardening
Metal Fabrication Work
Disease and Infection Control
Handling Hazardous and Toxic Waste
Woodwork and Fabrication

Features

4 Point Headstrap Adjustment
Preformed Nose Bridge
Unique Inner Face Seal
Suitable for Healthcare
Made in the UK

Further Information

The 6000 SERIES is a uniquely designed cup shaped respirator offering a lightweight solution to protect against hazardous particals. The respirator features a preformed nose bridge and foam internal providing a secure and comfortable fit.

Available Options

Product Code Color Width Length Height Weight
ASR60301AZ
White /Orange
189mm 137mm 55mm 3.1g

Product Specifics

Master SKUASR60300V
Series6000
Filter Media MaterialNon-Woven Textile
Inner Cover MaterialPolypropylene
Headstrap MaterialLatex-Free Elastane,Polyester,Textile Elastic
Outer Cover MaterialPolypropylene
Nosefoam MaterialPolyethylene Foam

Certifications

CE
Cat LevelIII
UKCA
EN 149:2001 + A1:2009 FFP3 NR
EN 136:1998 Class 1

EN 149:2001

Class FFP3
Disposable

Options

Selected Option Specifics (ASR60301AZ)

SKUASR60301AZ
Main Color
White
Secondary Color
Orange
Shelf Life5yr

Storage Conditions

Minimum Temperature-5°C
Maximum Temperature35°C
Humidity<70%

Unit Dimensions

Unit Weight3.1g
Unit Width189mm
Unit Length137mm
Unit Height55mm

Packaging

Items per Pack10
Items per Case120
Case height40cm
Case width42cm
Case length44cm
Case weight3.72kg
Packs per Carton12
Units per Pallet2880

Product Selector Guidance Chart

Option Assigned Protection (APF) Oil/Water Based Particulates Non-Toxic Dusts Fine Toxic Dusts/Mists/Fumes Very Fine Toxic Dusts/Mists/Fumes Metal Fume
ASR60301AZ 20 Recommended Alternative Alternative Recommended Recommended

Parts Dimensions

Part Width Length Height
Headband Clip 19 mm 37 mm 4 mm
Headband 12 mm 420 mm 0.4 mm
Nosebridge 45 in 45 in 45 in
Respirator 189 mm 137 mm 55 mm
Recommendations for Use
USER INSTRUCTIONS: Use only in accordance with these instructions, as incorrect use could result in danger to life or health. Fit according to instructions BEFORE entering the contaminated area. Discard safely after use or replace with a new respirator if: • Excessive clogging of the respirator causes breathing difficulty or discomfort • If the respirator becomes damaged • The respirator has been worn for 8 hours. Do not use in oxygen deficient, (less than 19%), explosive atmospheres or confined spaces where gases or aerosols may accumulate and the concentration of contaminant is immediately dangerous to life or health, (over the IDLH value). Leave the contaminated area if: • The respirator is damaged • You become dizzy or have difficulty breathing • You become irritated or other distress occurs • You become uncertain of the nature and/or concentration of contaminant. WARNING: • As facial hair reduces the protection offered it is recommended that these respirators are used by clean shaven personnel only • Do not use for protection against gases • Single shift use only • Do not remove whilst in contaminated area.
EC Compliance
Economic Operator [EU]: Globus EMEA Ltd., 51 Dawson Street, Dublin, D02 AN25, Ireland. Product conforms to the requirement of: UK Regulation 2016/425 on PPE, brought into UK Law and amended & Regulation (EU) 2016/425 of the European Parliament and of the Council as Personal Protective Equipment (PPE). Type-Examination, (Module B), Certificates issued by: UK - CCQS UK Ltd., Level 2, 5 Harbour Exchange Square, London, E14 9GE, UK. [A.B. No. 1105]. EU - CCQS Certification Services Ltd., Block 1 Blanchardstown Corporate Park, Ballycoolin Road, Blanchardstown, Dublin D155 AKK1, Ireland. [N.B. No. 2834]. PPE is subject to the conformity assessment procedure, conformity to type based on Quality Assurances of the production process, (Module D), under the surveillance of the Approved/Notified Body(ies): UK - SGS UK Ltd., Rossmore Business Park, Ellesmere Port, Cheshire, CH65 3EN, UK. [A.B. No. 0120]. EU - SGS Fimko Oy, Takomtie 8, FI-00380, Helsinki, Finland. [N.B. No. 0598].
Compare 3 products selected