AP-3
FFP3 Vertical Fold-Flat Respirator
Product Features
- Lightweight, vertical fold flat respirator
- Flexible nose bridge
- Electrostatic filter media
- Conforms to EN 149:2001+A1:2009 FFP3 NR & EN14683:2019+AC:2019
- Inner seal around the nose area for an effective fit
- Available in two size options (AP-3 - Regular, APS-3 - Small). Ideal to fit a wide range of face shapes
- Splash Resistant
- Made in the UK
Certifications
CAT III
Options
Product Resources
Industry
Applications
Emergency Responders
Painting and Finishing
Nursing
Labouring
Disease and Infection Control
Pharmacists
Features
Unique Inner Face Seal
Made in the UK
Further Information
The Alphasol+ is a vertical fold flat disposable respirator designed with an inner face seal to offer an excellent fit for all face shapes.
Available Options
| Product Code | Size | Colour | Weight |
|---|---|---|---|
| ASRAP300AD | One-Size |
White
|
1.87g |
Product Specifics
| Master SKU | ASRAP300 |
|---|---|
| Series | AlphaSOL+ |
| Filter Media Material | Non-Woven Textile |
| Inner Cover Material | Polypropylene |
| Headstrap Material | Latex-Free Elastane, Polyester, Textile Elastic |
| Outer Cover Material | Polypropylene |
| Nosebridge Material | Aluminium |
| Nosefoam Material | Polyethylene Foam |
Certifications
| CE | ✓ |
|---|---|
| Cat Level | III |
| UKCA | ✓ |
| EN 149:2001 + A1:2009 | FFP3 NR |
| EN 14683:2019 | Type IIR |
EN 149:2001
| Class | FFP3 |
|---|---|
| Disposable | ✓ |
Options
Selected Option Specifics (ASRAP300AD)
| SKU | ASRAP300AD |
|---|---|
| Size | One-Size |
| Main Colour |
White
|
| Shelf Life | 5Years |
Storage Conditions
| Minimum Temperature | -5°C |
|---|---|
| Maximum Temperature | 35°C |
| Humidity | <70% |
Unit Dimensions
| Unit Weight | 1.87g |
|---|
Packaging
| Items per Pack | 20 |
|---|---|
| Items per Case | 240 |
| Case height | 47cm |
| Case width | 29cm |
| Case length | 55cm |
| Packs per Carton | 12 |
| Units per Pallet | 11520 |
Product Selector Guidance Chart
| Option | Assigned Protection (APF) | Oil/Water Based Particulates | Non-Toxic Dusts | Fine Toxic Dusts/Mists/Fumes | Very Fine Toxic Dusts/Mists/Fumes | Metal Fume |
|---|---|---|---|---|---|---|
| ASRAP300AD | 20 | Recommended | Alternative | Alternative | Recommended | Recommended |
Parts Dimensions
| Part | Width | Length | Height |
|---|---|---|---|
| Respirator | 125 mm | 160 mm | 10 mm |
Recommendations for Use
USER INSTRUCTIONS:
Use only in accordance with these instructions, as incorrect use could result in danger to
life or health. Fit according to instructions BEFORE entering the contaminated area.
Discard safely after use or replace with a new respirator if:
• Excessive clogging of the respirator causes breathing difficulty or discomfort
• If the respirator becomes damaged
• The respirator has been worn for 8 hours.
Do not use in oxygen deficient, (less than 19%), explosive atmospheres or confined
spaces where gases or aerosols may accumulate and the concentration of contaminant
is immediately dangerous to life or health, (over the IDLH value).
Leave the contaminated area if:
• The respirator is damaged
• You become dizzy or have difficulty breathing
• You become irritated or other distress occurs
• You become uncertain of the nature and/or concentration of contaminant.
WARNING:
• As facial hair reduces the protection offered it is recommended that these respirators
are used by clean shaven personnel only
• Do not use for protection against gases
• Single shift use only
• Do not remove whilst in contaminated area.
EC Compliance
Economic Operator [EU]: Globus EMEA Ltd., 51 Dawson Street, Dublin, D02 AN25, Ireland.
Product conforms to the requirement of: UK Regulation 2016/425 on PPE, brought into UK Law and amended & Regulation (EU) 2016/425 of the European Parliament and of the Council as Personal Protective Equipment (PPE).
Type-Examination, (Module B), Certificates issued by:
UK - BSI Assurance UK Ltd., Kitemark Court, Davy Ave, Knowlhill, Milton Keynes, MK5 8PP, UK. [A.B. No. 0086].
EU - BSI Group The Netherlands B.V., Say Building, John M. Keynesplein 9, 1066 EP, Amsterdam, Netherlands. [EU Notified Body No. 2797].
PPE is subject to the conformity assessment procedure, conformity to type based on Quality Assurance of the production process, (Module D), under the surveillance of the Approved/Notified Body(-ies):
UK - SGS UK Ltd., Rossmore Business Park, Ellesmere Port, Cheshire, CH65 3EN, UK. [A.B. No. 0120].
EU - SGS Fimko Oy, Takomtie 8, FI-00380, Helsinki, Finland. [N.B. No. 0598].
