HXC-2 Clear Panel Horizontal Fold Flat FFP2


P2 Disposable Fold-Flat Respirator with a Clear Panel

HXC-2 Clear Panel Horizontal Fold Flat FFP2 mobile image

Product Features

  • Lightweight, fold flat respirator
  • Flexible nose bridge
  • Electrostatic filter media
  • Conforms to EN 149:2001+A1:2009 & Tested in accordance of Transparent Face Mask Technical Specification: 1st April 2021
  • FFP2 NR
  • Clear Anti-Fog Panel to provide visibility to the mouth making lip reading easier
  • Tapered shape for enhanced fit
  • Premium quality straps ensure stability on the face
  • Non-ferrous nose bridge
  • Valve free
  • Latex and silicone free






Social Care
Disease and Infection Control


Lightweight Fabric
Permits Clear Communication
Reduced Heat Build Up
Suitable for Healthcare

Further Information

The HXC horizontal fold flat disposable respirator offers excellent protection to limit the transmittion of infection with the addition of a clear anti-fog front panel, positioned to prevent reflection and make lip reading easier.

Available Options

Product Code Size Color Weight
White /Clear

Product Specifics

Filter Media MaterialNon-Woven Textile
Inner Cover MaterialPolypropylene
Headstrap MaterialLatex-Free Elastane,Polyester,Textile Elastic
Outer Cover MaterialPolypropylene
Nosefoam MaterialPolyethylene Foam


Cat LevelIII
EN 149:2001 + A1:2009 FFP2 NR
EN 136:1998 Class 1

EN 149:2001

Class FFP2


Selected Option Specifics (ASRHXC200AF)

Main Color
Secondary Color
Shelf Life5yr

Storage Conditions

Minimum Temperature-5°C
Maximum Temperature35°C

Unit Dimensions

Unit Weight1.33g


Items per Case20
Case height27cm
Case width32.4cm
Case length47.7cm
Units per Pallet6720

Product Selector Guidance Chart

Option Assigned Protection (APF) Oil/Water Based Particulates Non-Toxic Dusts Fine Toxic Dusts/Mists/Fumes Very Fine Toxic Dusts/Mists/Fumes Metal Fume
ASRHXC200AF 10 Recommended Recommended Recommended

Parts Dimensions

Part Width Length Height
Respirator 106.56 mm 224 mm 4 mm
Recommendations for Use
USER INSTRUCTIONS: Use only in accordance with these instructions, as incorrect use could result in danger to life or health. Fit according to instructions BEFORE entering the contaminated area. Discard safely after use or replace with a new respirator if: • Excessive clogging of the respirator causes breathing difficulty or discomfort • If the respirator becomes damaged • The respirator has been worn for 8 hours. Do not use in oxygen deficient, (less than 19%), explosive atmospheres or confined spaces where gases or aerosols may accumulate and the concentration of contaminant is immediately dangerous to life or health, (over the IDLH value). Leave the contaminated area if: • The respirator is damaged • You become dizzy or have difficulty breathing • You become irritated or other distress occurs • You become uncertain of the nature and/or concentration of contaminant. WARNING: • As facial hair reduces the protection offered it is recommended that these respirators are used by clean shaven personnel only • Do not use for protection against gases • Single shift use only • Do not remove whilst in contaminated area.
EC Compliance
Economic Operator [EU]: Globus EMEA Ltd., 51 Dawson Street, Dublin, D02 AN25, Ireland. Product conforms to the requirement of: UK Regulation 2016/425 on PPE, brought into UK Law and amended & Regulation (EU) 2016/425 of the European Parliament and of the Council as Personal Protective Equipment (PPE). Type-Examination, (Module B), Certificates issued by: UK - CCQS UK Ltd., Level 2, 5 Harbour Exchange Square, London, E14 9GE, UK. [A.B. No. 1105]. EU - CCQS Certification Services Ltd., Block 1 Blanchardstown Corporate Park, Ballycoolin Road, Blanchardstown, Dublin D155 AKK1, Ireland. [N.B. No. 2834]. PPE is subject to the conformity assessment procedure, conformity to type based on Quality Assurances of the production process, (Module D), under the surveillance of the Approved/Notified Body(ies): UK - SGS UK Ltd., Rossmore Business Park, Ellesmere Port, Cheshire, CH65 3EN, UK. [A.B. No. 0120]. EU - SGS Fimko Oy, Takomtie 8, FI-00380, Helsinki, Finland. [N.B. No. 0598].
Compare 3 products selected